Appendix A Setting Up Your Computer's Ip Address - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual
Zyxel internet security gateway user's guide
Hide thumbs
Also See for ZyXEL ZyWALL 2WE:
- Compact manual (42 pages) ,
- Specifications (2 pages) ,
- User manual (614 pages)
Table of Contents
Advertisement
ZyWALL 2 and ZyWALL 2WE
Appendix A
Setting up Your Computer's IP Address
All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed.
Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all versions of
UNIX/LINUX include the software components you need to install and use TCP/IP on your computer.
Windows 3.1 requires the purchase of a third-party TCP/IP application package.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later
operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP settings in order to
"communicate" with your network.
If you manually assign IP information instead of using dynamic assignment, make sure that your computers
have IP addresses that place them in the same subnet (192.168.1.2 to 192.168.1.254 range with a subnet mask
of 255.255.255.0.) as the default ZyWALL's LAN port IP address (192.168.1.1).
Windows 95/98/Me
1. Click Start, Settings, Control Panel and double-click the
Network icon to open the Network window.
Setting Up Your Computer's IP Address
1
Advertisement
Table of Contents
Troubleshooting
