Figure 25-4 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 25-1 Dhcp Ethernet Setup Menu Fields - ZyXEL Communications ZyWALL 10W User Manual

DHCP= Server
Client IP Pool:
Starting Address= 192.168.2.33
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP= Server
Client IP Pool:
Starting Address= 192.168.2.33
Press Space Bar to Toggle.

Figure 25-4 Menu 3.2: TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.
FIELD
DHCP This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and
relays requests and responses between the remote server and the
clients.
When set to Server, the following items need to be set:
Configuration:
Client IP Pool This field specifies the first of the contiguous addresses in the IP
Starting address pool.
Address
Size of Client IP This field specifies the size, or count of the IP address pool.
Pool
LAN Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:

Table 25-1 DHCP Ethernet Setup Menu Fields

ZyWALL Series Internet Security Gateway
TCP/IP Setup:
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
TCP/IP Setup:
IP Address= 192.168.2.1
DESCRIPTION
First address in
the IP Pool
Size of the IP
Pool
IP addresses of
the DNS
servers
EXAMPLE
Server
192.168.1.3
3
32
25-3