Figure 12-25 Menu 15.3-Trigger Port Setup; Two Points To Remember About Trigger Ports - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

ZyWALL 2 and ZyWALL 2WE
5. Only Jane can connect to the Real Audio server until the connection is closed or times out. The
ZyWALL times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP
(Transfer Control Protocol/Internet Protocol).

12.6.2 Two Points To Remember About Trigger Ports

1. Trigger events only happen on data that is going coming from inside the ZyWALL and going to
the outside.
2. If an application needs a continuous data stream, that port (range) will be tied up so that another
computer on the LAN can't trigger it.
Only one LAN computer can use a trigger port (range) at a time.
Enter 3 in menu 15 to display Menu 15.3 — Trigger Port Setup, shown next.
Rule
----------------------------------------------------------------------
1. Real Audio
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
12-26
Menu 15.3 - Trigger Port Setup
Incoming
Name Start Port
6970
Press ENTER to Confirm or ESC to Cancel:
Figure 12-25 Menu 15.3—Trigger Port Setup
End Port Start Port
7170
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Trigger
End Port
7070 7070
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
NAT