Edit Ip; Figure 10-5 Menu 11.3: Remote Node Network Layer Options For Ethernet Encapsulation - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

My IP Addr
My IP Mask
Server IP Addr
Connection
ID/Name
Schedules
Nailed-Up
Connections

10.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to open Menu 11.3 - Network Layer Options.

Figure 10-5 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP
Addr field for Ethernet encapsulation.
Remote Node Setup
Table 10-3 Fields in Menu 11.1 (PPTP Encapsulation)
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must
follow the "c:id" and "n:name" format.
This field is optional and depends on the requirements of your DSL
modem.
You can apply up to four schedule sets here. For more details refer
to the Call Schedule Setup chapter.
Press [SPACE BAR] and then [ENTER] to select Yes if you want to
make the connection to this remote node a nailed-up connection.
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
ZyWALL 2 and ZyWALL 2WE
10.0.0.140
255.255.255.0
10.0.0.138
N:My ISP
No
10-7