Navigating The Smt Interface; Figure 4-2 Password Screen - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual
Zyxel internet security gateway user's guide
Hide thumbs
Also See for ZyXEL ZyWALL 2WE:
- Compact manual (42 pages) ,
- Specifications (2 pages) ,
- User manual (614 pages)
Table of Contents
Advertisement
ZyWALL 2 and ZyWALL 2WE
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL
automatically logs you out and displays a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.
4.3
Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
OPERATION
Move down to
To move forward to a submenu, type in the number of the desired submenu and press
another menu
[ENTER].
Move up to a
Press the [ESC] key to move back to the previous menu.
previous menu
Move to a
Fields beginning with "Edit" lead to hidden menus and have a default setting of No. Press
"hidden" menu
[SPACE BAR] to change No to Yes, and then press [ENTER] to go to a "hidden" menu.
Move the cursor Within a menu, press [ENTER] to move to the next field. You can also use the
[UP]/[DOWN] arrow keys to move to the previous and the next field, respectively.
Entering
You need to fill in two types of fields. The first requires you to type in the appropriate
information
information. The second allows you to cycle through the available choices by pressing
[SPACE BAR], and then pressing [ENTER] to select your choice and move to the next
field.
Required fields
All fields with the symbol <?> or ChangeMe must be filled in order be able to save the new
configuration.
N/A fields
Some of the fields in the SMT will show a <N/A>. This symbol refers to an option that is
Not Applicable.
Save your
Save your configuration by pressing [ENTER] at the message "Press ENTER to confirm or
configuration
ESC to cancel". Saving the data on the screen will take you, in most cases to the previous
menu.
Exit the SMT
Type 99 at the main menu prompt and press [ENTER] to exit the SMT interface.
4-2
Enter Password : XXXX
Figure 4-2 Password Screen
DESCRIPTION
Introducing the SMT
Advertisement
Table of Contents
Troubleshooting
