Chapter 9 Internet Access; Introduction To Internet Access Setup; Ethernet Encapsulation; Table 9-1 Menu 4: Internet Access Setup Menu Fields - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

9.1

Introduction to Internet Access Setup

Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access
the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or
PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.
9.2

Ethernet Encapsulation

If you choose Ethernet in menu 4 you will see the next screen.
The following table describes this screen.
FIELD
ISP's Name
Internet Access
This chapter shows you how to configure your ZyWALL for Internet access.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 9-1 Menu 4: Internet Access Setup (Ethernet)

Table 9-1 Menu 4: Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g., myISP. This information is
for identification purposes only.
ZyWALL 2 and ZyWALL 2WE
Internet Access
DESCRIPTION
Chapter 9
9-1