ZyWALL 2 and ZyWALL 2WE
You can apply up to four filter sets to a particular port to block multiple types of packets. With each filter
set having up to six rules, you can have a maximum of 24 rules active for a single port.
19.2 Configuring a Filter Set
The ZyWALL includes filtering for NetBIOS over TCP/IP packets by default. To configure another filter
set, follow the procedure below.
Step 1.
Enter 21 in the main menu to open menu 21.
Step 2.
Enter 1 to bring up the following menu.
Filter
Set #
------
19-4
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Figure 19-3 Menu 21: Filter and Firewall Setup
Menu 21.1 - Filter Set Configuration
Comments
-----------------
1
_______________
2
_______________
3
_______________
4
_______________
5
_______________
6
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 19-4 Menu 21.1: Filter Set Configuration
Filter
Set #
Comments
------
-----------------
7
_______________
8
_______________
9
_______________
10
_______________
11
_______________
12
_______________
Filter Configuration