Table 18-2 Log Settings - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

LABEL
Address Info
Mail Server
Mail Subject
Send Log To
Send Alerts To
UNIX Syslog
Active
Syslog IP Address
Log Facility
Send Log
Log Schedule
Centralized Logs

Table 18-2 Log Settings

Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent
via e-mail.
Type a title that you want to be in the subject line of the log e-mail message that
the ZyWALL sends.
Logs are sent to the e-mail address specified in this field. If this field is left blank,
logs will not be sent via e-mail.
Alerts are sent to the e-mail address specified in this field. If this field is left blank,
alerts will not be sent via e-mail.
UNIX syslog sends a log to an external UNIX server used to store logs.
Click Active to enable UNIX syslog.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to your UNIX manual for
more information.
This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
•
Daily
•
Weekly
•
Hourly
•
When the Log is Full
•
None.
If you select Weekly or Daily, specify a time of day when the E-mail should be
sent. If you select Weekly, then also specify which day of the week the E-mail
should be sent. If you select When Log is Full, an alert is sent when the log fills
up. If you select None, no log messages are sent
ZyWALL 2 and ZyWALL 2WE
DESCRIPTION
18-5