Remote Node Profile Setup; Ethernet Encapsulation; Figure 345 Menu 11: Remote Node Setup; Figure 346 Menu 11.1: Remote Node Profile For Ethernet Encapsulation - ZyXEL Communications ZyWall 5 Series User Manual

ZyWALL 5/35/70 Series User's Guide

Figure 345 Menu 11: Remote Node Setup

40.3 Remote Node Profile Setup

The following explains how to configure the remote node profile menu. Not all fields are
available on all models.

40.3.1 Ethernet Encapsulation

There are three variations of menu 11.x depending on whether you choose Ethernet
Encapsulation, PPPoE Encapsulation or PPTP Encapsulation. You must choose the
Ethernet option when the WAN port is used as a regular Ethernet. The first menu 11.x screen
you see is for Ethernet encapsulation shown next.

Figure 346 Menu 11.1: Remote Node Profile for Ethernet Encapsulation

600
Menu 11 - Remote Node Setup
1. WAN_1 (ISP, SUA)
2. WAN_2 (ISP, NAT)
3. -Dial (BACKUP_ISP, SUA)
Enter Node # to Edit:
Menu 11.1 - Remote Node Profile
Rem Node Name= WAN_1
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server= N/A
Relogin Every (min)=
Press ENTER to Confirm or ESC to Cancel:
Route= IP
Edit IP= No
Session Options:
Schedules=
Edit Filter Sets= No
N/A
Chapter 40 Remote Node Setup