Table of Contents
Advertisement
Chapter 5
•
System Up Time
- The length of the time since the router was last powered on or reset.
Click
Refresh
to get the latest status and settings of the router.
5. 2.
Network
5. 2. 1.
WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Advanced
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click
Renew
to renew the IP parameters from your ISP. Click
parameters.
•
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
>
Network
> WAN.
Configure the Router in Hotspot Router Mode
Dynamic
IP, and the router will
Release
to release the IP
94
Advertisement
Table of Contents
