TP-Link TP-TL-WR1043N User Manual page 112

Chapter 5
Done!
5. 3. 5. Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.
2. Go to
Advanced
3. Click
Enable to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-
07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4 ) Click Save
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
> Wireless 2.4GHz >
Configure the Router in Hotspot Router Mode
> Wireless 2.4GHz
as the filtering rule.
and fill in the blanks.
and click Back.
Wireless Advanced.
> Wireless MAC Filtering.
109