Chapter 4
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
•
Connect Automatically
when it is down.
•
Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
4. 2. 3.
MAC Clone
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Advanced
3. Configure the WAN MAC address and click Save.
•
WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
•
Your PC's MAC Address
the router. If the MAC address is required, you can click
MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
- The connection can be re-established automatically
- You can click
mode. The Internet connection can be disconnected automatically
>
Network
>
MAC
Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is managing
WAN MAC Address
Configure the Router in Standard Router Mode
Connect/Disconnect
Max Idle Time
to restore the MAC address of WAN
Clone MAC Address
field.
to connect/disconnect
function as
Connect
Max Idle Time
because some
and this
35