Table of Contents
Advertisement
Chapter 6
•
Enable SSID Broadcast
name (SSID).
6. 4. 2.
WPS
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select
Press the button of the new device in two minutes
- If enabled, the router will broadcast the wireless network
Wireless 2.4GHz
> WPS.
Enabled
and click
Configure the Router in Access Point Mode
Add
Device.
and click Connect.
162
Advertisement
Table of Contents
