Table of Contents
Advertisement
Chapter 4
•
APN
- Enter the APN provided by your ISP.
•
Username/Password
•
MTU Size
- The default value is 1480. Keep the default one unless required to change
by your ISP.
•
Use The Following DNS Servers
server IP address for you.
•
Primary DNS
- Enter the DNS IP address provided by your ISP.
•
Secondary DNS
-
(Optional)
If your 3G/4G USB modem is not supported by the router, please follow the steps below
to have further configuration.
1. Download a most recent 3G/4G USB modem configuration file from our website
http://www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3. Go to
Advanced
4. Click
Add New...
5. Click
Browser...
to locate the file you have downloaded and click Upload.
4. 2. 2.
WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
- Enter the username and password provided by your ISP.
- Select this check box if your ISP specifies a DNS
Enter another DNS IP address provided by your ISP.
>
Network
> 3G/4G, and click
Configure the Router in Standard Router Mode
Modem
Settings.
27
Advertisement
Table of Contents
