Table of Contents
Advertisement
Chapter 4
4. 3. 5.
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Advanced
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.
•
Transmit Power
- Select High,
router.
High
is the default setting and recommended.
•
Beacon Interval
- Enter a value between 40-1000 milliseconds for Beacon Interval
here. Beacon Interval value determines the time interval of the beacons. The beacons
are the packets sent by the Router to synchronize a wireless network. The default
value is 100.
•
RTS Threshold
- Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the Router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
•
Fragmentation Threshold
packets will be fragmented. Setting a low value for the Fragmentation Threshold may
result in poor network performance because of excessive packets. 2346 is the default
setting and is recommended.
•
DTIM Interval
- This value determines the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of the next window
for listening to broadcast and multicast messages. When the Router has buffered
>
Wireless 2.4GHz
>
Middle
- This value is the maximum size determining whether
Configure the Router in Standard Router Mode
Wireless
Advanced.
or
Low
which you would like to specify for the
43
Advertisement
Table of Contents
