Table of Contents
Advertisement
Chapter 8
a-f, A-F) in the specified length. ASCII format stands for any combination of
keyboard characters in the specified length.
•
WEP Key (Password)
matching WEP key. Make sure these values are identical on all wireless clients
in your network.
•
Key Type
- Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption.
Disabled
means this WEP key entry is invalid.
•
64-bit
- Enter 10 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 5 ASCII characters.
•
128-bit
- Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 13 ASCII characters.
•
152-bit
- Enter 32 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 16 ASCII characters.
8. 4. 3.
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default
values; otherwise it may result in lower wireless network performance.
•
Transmit Power
- Select High,
router.
High
is the default setting and recommended.
•
RTS Threshold
- Here you can specify the RTS (Request to Send) Threshold. If the
packet is larger than the specified RTS Threshold size, the router will send RTS frames
- Select which of the four keys will be used and enter the
Wireless 2.4GHz
>
Wireless
Middle
Configure the Router in Client Mode
Advanced.
or
Low
which you would like to specify for the
209
Advertisement
Table of Contents
