Table of Contents
Advertisement
Chapter 7
a-f, A-F) in the specified length. ASCII format stands for any combination of
keyboard characters in the specified length.
•
WEP Key (Password)
matching WEP key. Make sure these values are identical on all wireless clients
in your network.
•
Key Type
- Select the WEP key length (64-bit, 128-bit or 152-bit) for encryption.
Disabled
means this WEP key entry is invalid.
•
64-bit
- Enter 10 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 5 ASCII characters.
•
128-bit
- Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 13 ASCII characters.
•
152-bit
- Enter 32 hexadecimal digits (any combination of 0-9, a-f and A-F. Null
key is not permitted) or 16 ASCII characters.
7. 4. 3.
Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
How can I
do that?
- Select which of the four keys will be used and enter the
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For
example, you want the wireless client A with the MAC
address 00-0A-EB-B0-00-0B and the wireless client B with the
MAC address 00-0A-EB-00-07-5F to access the router, but other
wireless clients cannot access the router
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
Setting
>
Wireless 2.4GHz
3. Click
Enable
to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blank.
Configure the Router in Range Extender Mode
>
Wireless MAC
as the filtering rule.
Filtering.
188
Advertisement
Table of Contents
