TP-Link TP-TL-WR1043N User Manual page 210

Chapter 8
• Root AP Connection
Disable to enable/disable the root AP connection.
• Enable WDS - If your host AP supports WDS well, please enable this option. If WDS is
enabled, all traffic from wired networks will be forwarded in the format of WDS frames
consisting of four address fields. If WDS is disabled, three address frames are used.
• Wireless Name of Root AP
• MAC Address of Root AP
• Survey - Click this button, and the
Point you want to connect to, and click
network's SSID and MAC address will be automatically filled into the corresponding
box.
8. 4. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting >
3. Configure the security settings of your wireless network and click Save.
- Displays the status of the root AP connection. Click Enable/
- Enter the SSID of the AP that you want to access.
- Enter the MAC address of the AP that you want to access.
AP List
Wireless 2.4GHz > Wireless
Configure the Router in Client Mode
page will appear. Find the SSID of the Access
Connect in the corresponding row. The target
Security.
207