TP-Link TP-TL-WR1043N User Manual page 219

Chapter 8
5. Wait a few minutes for the upgrade and reboot to complete.
8. 6. 4. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting > System Tools
the default values.
• The default Username: admin
• The default Password: admin
• The default
• The default
8. 6. 5. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting >
> Factory
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
System Tools > Backup &
Configure the Router in Client Mode
Defaults. Click Restore
Restore.
to reset all settings to
216