Table of Contents
Advertisement
Chapter 5
Virtual Servers can be used for setting up public services on your local network, such
as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
I want to:
Share my personal website I've built on local network with my
friends through the Internet.
For
example, the personal website has been built in my home
PC (192.168.0.100). I hope that my friends on the Internet can
visit my website in some way. My PC is connected to the router
with the WAN IP address 218.18.232.154.
Personal Website
LAN
Home
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to
Advanced
4. Click
Add
New. Select
Port
list. The
Service
automatically filled IN. Enter the PC's IP address 192.168.0.100
in the
IP Address
5. Leave the status as
Note:
• It is recommended to keep the default settings of
you are not clear about which port and protocol to use.
Configure the Router in Hotspot Router Mode
Router
WAN: 218.18.232.154
>
Forwarding
>
Virtual
HTTP
from the
Port,
Internal Port
field.
Enabled
and click Save.
Servers.
Common Service
and
Protocol
will be
Internal Port
and
Protocol
124
if
Advertisement
Table of Contents
