TP-Link TP-TL-WR1043N User Manual page 87

Chapter 4
• The default Username: admin
• The default Password: admin
• The default
• The default
4. 14. 6. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
¾ To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A ".bin" file of
the current settings will be stored in your computer.
¾ To restore configuration settings:
1. Click Choose File
and click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
4. 14. 7. Reboot
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
> System Tools > Backup &
to locate the backup configuration file stored in your computer,
> System Tools > Reboot, and you can restart your router.
Configure the Router in Standard Router Mode
Restore.
84