Table of Contents
Advertisement
Chapter 6
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select
Enter the new device's
filed and click Connect.
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
Enabled
and click
Add
PIN, enter your client device's current PIN in the
Enabled
and get the
Configure the Router in Access Point Mode
Device.
Current PIN
of the router.
PIN
163
Advertisement
Table of Contents
