TP-Link TP-TL-WR1043N User Manual page 53

Chapter 4
1. Insert your USB storage device into the router's USB port directly or using a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
3. Go to Advanced
4. Click Start to enable the FTP Server.
5. Click Enable to enable the Internet access to the FTP server.
6. Specify a port number for the
7. Click Save.
¾ To specify a folder to be accessed via the FTP server:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
3. Click Add New Folder.
4. Specify a name for the folder to be shared in the
folder you want to share or select
> USB Settings > FTP
Service
> USB Settings > FTP
Share entire partition
Configure the Router in Standard Router Mode
Server.
Port. The default value is 21.
Server.
Display Name
to share all folders.
field. And select the
50