TP-Link TPL-MR200 Quick Installation Manual

Quick Installation Guide
Wireless 4G LTE Router
Images may differ from actual products.
©2019 TP-Link 7106508324 REV4.1.1
2. Verify the Hardware Connection
Check the following LEDs' status. If the Internet LED
to the internet successfully.
Power Internet Wi-Fi
On On On
Note: If the Internet LED does not turn on, please refer to Q2 of Need Help? in this guide.
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
is on, your router is connected
1. Connect the Hardware
Power adapter
c. Connect the
power adapter
and turn on the
router.
3. Enjoy the Internet
Wired
Connect your computers to the router's LAN ports via Ethernet cables.
Wireless
a.
Find the SSID (network name) and wireless password printed on the label at the
bottom of the router.
b. Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
a. Install the antennas
and position them
upwards.
b. Insert the Micro SIM
card into the slot
until you hear a click.
Router
SIM card requirement
!
+ +
Nano SIM card + Provided SIM card adapter + Provided sticker
Micro SIM card
Standard
SIM card