Table of Contents
Advertisement
Chapter 8
to a particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
•
Fragmentation Threshold
packets will be fragmented. Setting a low value for the Fragmentation Threshold may
result in poor network performance because of excessive packets. 2346 is the default
setting and is recommended.
•
Enable WMM
- WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
•
Enable Short GI
- It is recommended to enable this function, for it will increase the
data capacity by reducing the guard interval time.
8. 4. 4.
Wireless Statistics
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
and received by each client device connected to the router.
•
MAC Address
- The MAC address of the connected wireless client .
•
Current Status
- The running status of the connected wireless client .
•
Received Packets
•
Sent Packets
- Packets sent by the wireless client.
•
Configure
- The button is used for loading the item to the Wireless MAC Filtering list.
•
Allow
- If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
•
Deny
- If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
- This value is the maximum size determining whether
Wireless 2.4GHz
>
Wireless Statistics
- Packets received by the wireless client.
Configure the Router in Client Mode
to check the data packets sent
210
Advertisement
Table of Contents
