TP-Link TP-TL-WR1043N User Manual page 170

Chapter 6
How can I
do that?
Done!
6. 4. 5. Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting >
3. Configure the advanced settings of your wireless network and click Save.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Setting
3. Click Enable
4. Select Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click Add New
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-
07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Wireless 2.4GHz > Wireless
Configure the Router in Access Point Mode
> Wireless 2.4GHz
to enable the Wireless MAC Filtering function.
as the filtering rule.
and fill in the blank.
in the Status drop-down list.
and click Back.
Advanced.
> Wireless MAC Filtering.
167