March 2021
The platform controls are used to operate the
machine from the platform.
Activating a function button sends a signal to the
Electronic Control Module (ECM). When the ECM
is in the function mode, the platform controls are
used to operate the various machine functions.
The platform controls consist of an Emergency
Stop button, electronic circuit board, proportional
control handle, drive/steer enable switch, alarm,
function buttons and LED display.
For further information or assistance, contact
Genie Product Support.
a red Emergency Stop button P2
b platform controls circuit board U3
c proportional control handle and drive/steer
enable switch JC9
d alarm H1
Part No. 1272217GT
GS
™
-30 • 32 • 46 • 47
Service and Repair Manual
Platform Controls
17