March 2021
5-7
Outrigger Cylinder Manifold Components – GS-3232
The outrigger function manifold is mounted behind an inspection door, at the battery side of the machine.
Index No. Description
—
Coil nut (item CA, CB. CC, CD)
1
Solenoid valve, 2 position 2 way
2
Orifice Plug, 0.037 inch / 0.94 mm
3
Check Valve, pilot operated
4
Pressure transducer
Front Outriggers
Note: 'alpha' callouts refer to corresponding notes on the hydraulic schematic.
Note: 'alpha-numeric' callouts refer to corresponding notes on the electrical schematic.
How to Install a Valve Cartridge
1
Dip the cartridge in clean oil to lube the O-rings.
2
Screw the cartridge in by hand until the top O-ring is met, then torque to specifications.
3
If required, install the valve coil(s) onto the valve stem. Install the coil nut onto the valve stem and
torque to specifications.
Part No. 1272217GT
Schematic Item
—
CA, CB, CC, CD
CE
CF
CG
GS
™
-30 • 32 • 46 • 47
Service and Repair Manual
Manifolds
Function
—
4-5 ft-lbs / 5-7 Nm
Outriggers extend /
retract
Outrigger retract
Retract flow control
20 ft-lbs / 27.1 Nm
Outrigger auto level
16 ft-lbs / 21.7 Nm
Rear Outriggers
Torque
25 ft-lbs / 34 Nm
—
63