Lift Pressure Selector Manifold Components - Gs-4047 - Terex Genie GS-1532 Service And Repair Manual

March 2021
5-5
Lift Pressure Selector Manifold Components – GS-4047
The lift pressure selector manifold is mounted behind an inspection door, at the ground control side of the
machine.
Index No. Description
— Coil nut (item DN)
— Plug
Lift pressure selector valve, 200 psi /
1
138 bar
2 Solenoid valve, 2 position 2 way
Note: 'alpha' callouts refer to corresponding notes on the hydraulic schematic.
Note: 'alpha-numeric' callouts refer to corresponding notes on the electrical schematic.
How to Install a Valve Cartridge
1 Dip the cartridge in clean oil to lube the O-rings.
2 Screw the cartridge in by hand until the top O-ring is met, then torque to specifications.
3 If required, install the valve coil(s) onto the valve stem. Install the coil nut onto the valve stem and
torque to specifications.
Part No. 1272217GT
Schematic Item
—
—
DM
DN
GS ™ -30 • 32 • 46 • 47
Service and Repair Manual
Manifolds
Function
— 4-5 ft-lbs / 5-7 Nm
— 13 ft-lbs / 18 Nm
Lift relief 20 ft-lbs / 27 Nm
Lift circuit 20 ft-lbs / 27 Nm
Torque
61