Operation Indicator Codes (Oic) - Terex Genie GS-1532 Service And Repair Manual

March 2021
Operational Indicator Codes
(OIC)
These codes are generated by the electrical
system to indicate machine operating status.
During normal operation a code will appear in the
platform controls LED readout if a condition such
as off-level, overload cutout, chassis mode
operation or pothole guards stuck occurs. These
codes are not indicators of a device malfunction in
the electrical system.
Code Condition
LL Off-Level
OL Platform Overload (CE / AS models)
CH Chassis Mode Operation
PHS Pothole Guard Stuck
nd No Drive (option)
Ld Lifting Disabled (GS-3232 only)
CHrg Charger Interlock (option)
LoHt Lift Height Limited (CE / AS models)
FLHt Limited Lift Height Cleared
ObS Obstruction (option)
OHL Outdoor Height Restriction
Note: The Ld Operation Indicator Code will appear
when the outriggers are not fully retracted, the
machine is not auto leveled, an outrigger has lost
contact with the ground or either level sensor
detects the machine is no longer level. When any
of the above scenarios occur, the lift function is
disabled.
The lift function will also be disabled while
extending or retracting the outriggers and during
the outrigger auto level procedure. While
performing the above operations, the Ld Operation
Indicator Code will appear.
Part No. 1272217GT
Note: The CHrgr code indicates the charger is
connected to an AC power source and
functionality is limited. To clear the code,
disconnect the charger from the AC power source.
Note: The LoHt code indicates the platform has
reached the maximum working height or a
maximum working height has been activated by
the operator.
Note: The FLHt code indicates the operator has
deactivated the maximum working height LoHt
code.
Note: The ObS code indicates the contact alarm
has been actuated by an obstruction. Move the
machine away from the obstruction to clear the
code.
Note: The br operation indicator code will appear
when the drive brake was release by manual.
When the code appears, drive and lift functions
are disabled.
GS ™ -30 • 32 • 46 • 47
Service and Repair Manual
Diagnostics
161