How To Clear The Memory; How To Restore The Settings; How To Delete All Screenshot Data - Furuno GP-3700 Operator's Manual

12. MAINTENANCE, TROUBLESHOOTING
4. Select [3. TEST PATTERN] to start the display test. Each push of the ENTER
knob changes the LCD pattern in the sequence shown below.
RGB gradation
Checker board
5. Press the DISP key to close the test screen and the menu.
12.9

How to Clear the Memory

The user settings can be cleared to restart operation with default settings. Also, you
can delete user data (tracks, marks, waypoints and routes) or all screenshot data.
12.9.1

How to restore the settings

1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [6. TEST & MEMORY CLEAR].
4. Select [4. MEMORY CLEAR] to show the following message.
5. Select [RUN] to restore the settings. The equipment automatically restarts.
12.9.2

How to delete all screenshot data

1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [6. TEST & MEMORY CLEAR].
12-8
RGB gradation
Black
REBOOT WITH DEFAULT SETTINGS. ARE YOU SURE?
RUN CANCEL
White
Blue Green
Red