How To Display The Data Stored In The Internal Memory - Furuno GP-3700 Operator's Manual

10.2.2

How to display the data stored in the internal memory

Tracks, marks and lines stored in the internal memory can be displayed on the screen.
1. Press the MENU key to open the main menu.
2. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
3. Select [6. DISPLAY INTERNAL MEMORY] which has three pages ([INT MEMO-
RY 1] to [INT MEMORY 10]).
4. Select [DISPLAY OWN TRACK], [DISP OTHER TRCK (CONS)] or [ADD MARK/
LINE DISP.] in the internal memory block you want to load. The memory capacity
and the number of currently recorded data are displayed to the right of each item.
5. Select [YES].
6. Repeat steps 4 and 5 to load other data.
7. Press the DISP key to close the menu. Selected data (tracks, marks, lines) appear
on the screen. Note that these cannot be erased or edited.
To cancel the data display, select [NO] at step 5.
10. HOW TO RECORD, PLAY BACK DATA
2150/30000
500/40000
1800/30000
2000/30000
480/40000
1750/30000
2300/30000
650/40000
2100/30000
2700/30000
850/40000
2550/30000
0/30000
0/10000
0/10000
0/10000
0/10000
0/30000
10-3