1. OPERATIONAL OVERVIEW
1.4.4
How to set the navigation/destination information
To set the navigation/destination information, do the following:
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [4. DISPLAY SETTING].
4. Select [7. NAVIGATION INFO. 1 SETTING], [8. NAVIGATION INFO. 2 SET-
TING], [9. WAYPOINT INFORMATION 1 SETTING] or [0. WAYPOINT INFOR-
MATION 2 SETTING].
5. Select the layout for the NAV information box from the pattern list.
6. Select a frame, then select the item to display in the frame from the navigation
data list. Set up other frames similarly. The items in the list differ according to the
frame selected. To leave a frame blank, select [UNASSIGNED].
Navigation
data list
Ex. 1: When selecting the frame for
[OWN SHIP LATITUDE LONGITUDE]
7. Press the DISP key to close the menu.
1-8
When selecting [WAYPOINT
INFORMATION 1 (or 2)
SETTING], [WAYPOINT
INFORMATION 1 (or 2)
SETTING] and [DEST INFO1
(or 2)] are displayed.
Pattern list
Ex. 2: When selecting the frame for [SOG]
Press
or
to
shift the page.