Furuno GP-3700 Operator's Manual page 95

Note: The [SELECT WP] window closes automatically when there is no operation
for 10 seconds.
3. Press the numeric keys to enter the waypoint number to set as the destination
then push the ENTER knob.
A light-blue line connects the own ship with the destination. When selecting [DIS-
TANCE TO WAYPOINT] and [BEARING TO WAYPOINT] for destination information,
range and bearing from own ship to the destination appear on the NAV information
box.
How to set a waypoint as destination from the waypoint log
Up to 10 waypoints last-set as destinations are registered on the waypoint log. To set
a waypoint among these waypoints as the destination, do the following. When the
waypoint log memory becomes full, the oldest waypoint is erased to make room for
the latest.
1. Press the CURSOR ON/OFF key to turn off the cursor.
2. Press the GOTO key to show the [WP LOG] window.
[WP LOG]
window
Note: The [WP LOG] window closes automatically when there is no operation for
10 seconds.
3. Select the waypoint to set as the destination from the waypoint log.
A light-blue line connects the own ship with the destination. When selecting [DIS-
TANCE TO WAYPOINT] and [BEARING TO WAYPOINT] for destination information,
range and bearing from own ship to the destination appear on the NAV information
box.
7. DESTINATION
7-5