Table of Contents
Advertisement
3. Select [1. WAYPOINTS LIST].
4. Press the WPT key or ENTER knob to show the [EDIT WPT NAME] window.
Note: Push the ENTER knob after selecting a blank line.
5. Select [COORDINATE].
6. Select [LATITUDE/LONGITUDE].
7. Select [LATITUDE].
8. Press the numeric keys to enter the latitude of the waypoint then push the ENTER
knob. To switch the coordinate from North to South and vice versa, use the CUR-
SOR ON/OFF key.
9. Select [LONGITUDE].
10. Press the numeric keys to enter the longitude of the waypoint then push the EN-
TER knob. To switch the coordinate from East to West and vice versa, use the
CURSOR ON/OFF key.
To change waypoint name, mark color, mark shape, mark display, proximity radi-
us and comment, go to step 11. If you do not need to change those items, go to
step 23.
11. Select [NAME OF WPT].
5. WAYPOINTS
5-3
Advertisement
Table of Contents
Troubleshooting
