Furuno GP-3700 Operator's Manual page 92

7. DESTINATION
How to navigate to a single quick point
1. Set the quick point entry method to [ONE POINT], referring to "How to select the
quick point entry method" on page 7-1.
2. Show the plotter display with NAV information (see section 1.4.2 and
section 2.1.2).
3. Press the CURSOR ON/OFF key to turn on the cursor.
4. Put the cursor where you want to enter the quick point, then press the GOTO key.
Quick point name
TRIP: Range from
own ship to destination
Quick point
The quick point (destination) is marked and named "QP<001". A light-blue line con-
nects the own ship with the destination, and the line shows the shortest course to the
destination. Arrows on the line show the direction to follow to get to the destination.
When selecting [DISTANCE TO WAYPOINT], [BEARING TO WAYPOINT], [WAY-
POINT ETA, TTG] for destination information, range and bearing from own ship to the
destination, ETA and TTG to the destination appear on the NAV information box. The
location is saved to the waypoints list, under the name "QP<001".
Note 1: Each time a quick point is entered, previous quick points having the same
numbers as newly entered ones are written over.
Note 2: If waypoint data (L/L position) is received from an external navigator while
navigating to a quick point, the quick point is erased and the received waypoint be-
comes the destination.
7-2
32°53.0231'N
136°49.9430'E
BRG
TRIP
<
QP 001
9.52
NM
N33
40 50
QP<001
50
40 50
GP-3D WGS84
32°52.1231'N
136°38.9430'E
01/01 10:05
267.4°
T
000HR 57MIN
N33
E137
Own ship mark
50
Shortest course from
own ship to destination
(light-blue line)
E137
DISP. ALL
2NM
24.00NM
ETA and TTG to destination
BRG: Bearing from own
ship to destination