How To Play Back Data From The Internal Memory - Furuno GP-3700 Operator's Manual

10. HOW TO RECORD, PLAY BACK DATA
10.2.3

How to play back data from the internal memory

Data in the internal memory can be loaded to the working memory and played back
on the screen. However, loaded waypoint/route and setting data will replace current
data or add to current data, depending on play back method. For that reason, you may
want to record the current display before replaying data.
1. Press the MENU key to open the main menu.
2. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
3. Select [4. INTERNAL MEMORY PLAYBACK].
4. Select an item to replay.
5. Select [ADD] or [OVERWRITE] depending on the item selected at step 4.
[ADD]: Adds the selected data to the current display data.
[OVERWRITE]: Overwrites the current display data.
Note: When setting [RECORD MARK/TRACK] to [ADD], the selected data can
not be added if the memory capacity is reached (30,000). For [REC OWN TRK] or
[REC OTHR TRK], the oldest data is erased to make room for the latest. For ex-
ample, when 25,000 track points for own ship are added to the current 10,000
track points, the old 5,000 track points of the current 10,000 track points are
erased. Then 25,000 track points are added to the remaining 5,000 track points.
6. Repeat steps 4 and 5 to replay other data.
7. Select the data to replay from [DATA SELECTION]. The message "LOAD FILE.
ARE YOU SURE? (THE SYSTEM WILL REBOOT WHEN THE FILE IS LOAD-
ED.)" appears.
8. Select [RUN] to replay the data.
9. When the message of loading end appears, push the ENTER knob.
10. Press the DISP key to close the menu.
10-4
1:20150101094126 2000
2:20150101094127 2150
2700
3:20150101094128
4:20150101094129 2550
5:20150101094130 2600
1500 1300 70 20
1650 1350 85 22
1900 135
1800 27
1800
1550 95
25
1850 1650 120
26
12000/30000
1600/10000
3100/10000
2800/10000
1200/10000
7650/30000