Table of Contents
Advertisement
1. OPERATIONAL OVERVIEW
3) Set the unlock code as described below.
Rotate the ENTER knob to select a character, then push the knob to confirm
selection. Repeat this step to select all other characters. Select [ENTER] then
push the knob.
The message "UNLOCK CODE VERIFIED." appears.
4) Push the ENTER knob.
13. When unlocking the chart data automatically, select [5. REMOVE USB DEVICE].
The message "USB DEVICE CAN BE SAFELY REMOVED." appears. Push the
ENTER knob then remove the USB device.
14. Select [6. CLOSE]. The confirmation message appears.
15. Select [RUN]. The system restarts.
1-16
Advertisement
Table of Contents
Troubleshooting
