Furuno GP-3700 Operator's Manual page 14

1. OPERATIONAL OVERVIEW
No. Key, control
1
POWER/BRILL
2 MOB
3 WPT
4 GOTO
5 DISP
6 TM/RM
7 MODE
8 ZOOM IN, ZOOM OUT
9 ENTER knob
10 CANCEL
11 MENU
12 Numeric keys 0 to 9
13 MARK/NUM
14 PLOT INTVL
15 MARK COLOR
16 TRACK COLOR
17 , , ,
(CursorPad)
18 CENTER
19 CURSOR ON/OFF
20 CURSOR SEL
21 Trackball
22 UNDO
23 F1, F2, F3, F4, F5
1-2
• Short press at power-off: Turns the power on.
• Short press at power-on: Opens the [BRILL] window.
• Long press while powered: Turns the power off.
Marks a man overboard position at own ship position or cursor po-
sition.
Opens the [WAYPOINTS LIST] window.
Sets, releases destination.
• Cycles through displays (basic screen: plotter, compass).
• Returns to the basic screen with menu or window open.
Alternately selects true motion (TM) and relative motion (RM) dis-
plays.
TM: The own ship mark moves along with own ship position.
RM: The chart moves along with own ship position. The relative po-
sition for own ship mark on the screen is fixed.
Changes the orientation mode.
Zooms the chart display range in or out.
• Rotate: Changes numeric data, selects menu items.
• Push: Confirms alphanumeric data entry or an operation.
• Silences the audio alarm.
• Erases marks and waypoints.
• Clears alphanumeric data.
• Opens/closes the main menu.
• With the menu open, goes back one layer in selected menu.
• Closes the window.
• Enters numeric data.
• 1 to 8: Enters corresponding mark labeled on the key.
• Selects menu items.
• 0: Measures range and bearing between two points.
• 9: Enters the same mark as the last entered one then connects
them. This function is not available when no mark is entered
since power-on.
Selects mark input format, mark symbol or numeric.
Starts, stops plotting of own ship track.
Opens the [CHANGE MARK COLOR] window.
Opens the [CHANGE TRACK COLOR] window.
• Moves the cursor.
• Selects menu items.
• Cursor shown: Moves cursor to the screen center.
• Cursor not shown: Moves own ship position to the screen center
or the position one-third from the bottom of the screen depending
on the orientation mode.
• Confirms alphanumeric data entry or an operation on the menu.
• Turns on/off the cursor.
• Switches + to - and vice versa.
• Switches N to S, E to W and vice versa.
• Long press: Switches control between plotter split screen dis-
plays.
Selects cursor configuration among circle, parallel or diamond.
Moves the cursor.
Undoes previous mark/line input, edit or deletion operation.
Activates assigned program.
Description