Playing Back Data From A Memory Card; Uploading/Downloading Data; Uploading/Downloading Waypoints Data - Furuno GP-7000 Operator's Manual

9.1.4

Playing back data from a memory card

Data (track, waypoints, routes) can be loaded from a memory card and
displayed on the screen. This feature is useful for observing past data.
1. Insert the memory card to play back into the selected slot.
2. Open the MEMORY CARD list.
3. Rotate the [ENTER] knob to choose LOAD and then push the [ENTER] knob.
9.2

Uploading/Downloading Data

You can upload/download waypoints and routes from/to a PC or another
GP-7000/F to the internal memory, through the NMEA1, NMEA 2 or RS-232C
port at the rear of the display unit.
9.2.1

Uploading/downloading waypoints data

You may upload/download all waypoints data as follows.
1. Connect the PC or another GP-7000/F to the equipment.
2. Choose INPUT/OUTPUT from the ADVANCED menu.
3. Choose NMEA 1 OUTPUT, NMEA 2 OUTPUT or RS232 3 OUTPUT
appropriately.
The sentence window appears.
4. Choose WPL and then set it on.
5. Press the [CLEAR] key several times to close the window and menus.
6. Open the WAYPOINT LISTS.
On WPL
GLL
On RTE
VTG
Off TLL Out
BWR
Off
DBT
Off
DPT
Off
MTW
Off
VHW
Off
WCV
Off
APA
On
APB
Off
HDG
Off
BOD
Off
XTE
Off
RMA
On
RMB
On
RMC
Off
GGA
Off
HSC
Off
AAM
Off
GTD
Off
MWV
Off
ZDA
Sentences window
9. DATA TRANSFER
On
On
On
9-3