Agilent Technologies 5110 ICP-OES Service Manual page 76
Hide thumbs
Also See for 5110 ICP-OES:
- User manual (66 pages) ,
- Site preparation manual (56 pages) ,
- User manual (6 pages)
Table of Contents
Advertisement
4
Removal/ Installation, Replacement and Adjustment
Torch loader micro switch
1 Remove 2 hex head screws with 5mm hex driver.
2 Slide plate away from instrument to expose micro switch interlock.
3 Remove torx 10 screw.
4 Disconnect loom and replace switch as required. Be sure to tuck loom out of the way during
reassembly.
76
Agilent Restricted
Agilent 5110/5100 ICP-OES Service Manual
Advertisement
Table of Contents
