Agilent Technologies 5110 ICP-OES Service Manual page 128

4 Removal/ Installation, Replacement and Adjustment
Polychromator
DLA/Focus/W/L
adjustment
Back lighting jig
location
Grating prism
assembly
Removal of the polychromator outer box top cover provides access to:
• Shutter assembly
• Entrance slit plug
• Grating and prism casting assy
• Back lighting fixture access cover
• Polychromator and camera purge gas lines
• Camera rotation adjustment screws access plugs
• Full illumination LED fibre
1 Remove 4 pozidrive 2 point end cover access screws.
2 Remove 13 pozidrive 2 point screws that secure the top cover to the side walls and remove
the polychromator heater box top cover.
128 Agilent Restricted
Camera rotation
Camera rotation
Camera access
Slit access Screw
Agilent 5110/5100 ICP-OES Service Manual