Ricoh Aficio 2035e Service Manual page 852

INSTALLATION PROCEDURE
Model B147/B149
• If the PostScript 3 option is not installed, install the DOS option SD card in Slot 2.
• If the PostScript 3 option is installed, remove the Printer/Scanner card from Slot
1 and install the DOS option SD card in Slot 1.
• Follow the procedure in the B147/B149 Service Manual, section 5.7 SD Card
Appli Move, to move the Printer/Scanner application data to the DOS option card.
(The Printer/Scanner software is now on the SD card with the DOS option.)
• Remove Printer/Scanner card from Slot 3
NOTE: After the SD Card Appli Move procedure is completed the Printer/Scanner
card will no longer function
• After the procedure is completed, the DOS card, with Printer/Scanner
application data, will be in Slot 1. The PS3 card will be in Slot 2 and Slot 3 will be
empty
12. Connect the network cable if the NIB option is installed.
13. Connect the Fax cable if the fax option is installed.
14. Switch the main power switch on.
15. Check the display and make sure that the overwrite erase icon [A] is displayed.
16. Make a Sample Copy.
17. Watch the overwrite erase icon.
• The bottom of the icon becomes thicker [B].
• "Next Copy" is displayed briefly below the icon.
• The icon returns to its normal appearance [C].
18. Remove the Document Server and Scanner keytops and replace them with the
blank keytops provided.
B692/B694
[A]
09/09/2003 14:13
Origi Total Copies
.
0 1
B692I904.WMF
[B]
0
4
[C]
B692I905.WMF
SM