Ricoh Aficio 2035e Service Manual page 764

BIT SWITCHES
Printer Switch 0E
No FUNCTION
2 Page separation
0: Enabled
1: Disabled
3 Printing the sample image on
to reports
4 Bit 4 Bit 3
0 0
0 1
1 0
1 1
5-6 Not used
7 Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
Printer Switch 0F
No FUNCTION
0 Smoothing feature
to Bit 1 Bit 0
1 0 0
0 1
1 0
1 1
2 Duplex printing
0: Disabled
1: Enabled
3 Binding direction for Duplex
printing
0: Left binding
1: Top binding
4 Printing fax messages in user
code mode
0: Enabled
1: Disabled
5-7 Not used
B653
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
"Same size" means the sample image is printed at
100%, even if page separation occurs.
Setting
User Parameter Switch 19 (13H) bit 4 must be set to
The upper half
"0" to enable this switch.
only
Refer to Detailed Section Descriptions for more on
50% reduction
this feature.
in sub-scan only
Same size
Not used
Do not change the settings.
0: When page separation has taken place, all the
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
Setting
Disabled
Disabled
Enabled
Not used
COMMENTS
COMMENTS
(0, 0) (0, 1): Disable smoothing if the machine
receives halftone images from other manufacturers
fax machines frequently.
1: The machine always prints received fax
messages in duplex printing mode:
1: The machine holds the received fax messages
until the machine exits the restricted access mode
(user code or key counter).
If the machine enters the restricted access mode
again while printing fax messages, the machine
stops printing the machine exits the mode again.
Do not change the settings.
42
SP No. 1-103-015
SP No. 1-103-016
SM