Software Download - Ricoh Aficio 2035e Service Manual

Rev. 07/2004
⇒

5.2 SOFTWARE DOWNLOAD

1. Turn OFF the main power switch.
2. Disconnect all external interfaces:
• Network connection. Including: Wireless Card, USB, Parallel Printer
Cable and FireWire.
• All Fax line connections.
• Copy Connect Kit.
• External Auditing devices.
• Any Remote Monitor Systems.
3. Remove the IC card [A] cover.
4. Insert the IC card [B] containing the software
you wish to download into the card slot of the
controller.
5. Turn ON the main power.
6. Follow the instructions displayed on the LCD
panel
7. Monitor the downloading status on the
operation panel.
• While downloading is in progress, the LCD
will display "Writing". When downloading has
been completed, the panel will display "OK".
• For operation panel software, the Start key lights red while downloading is
in progress, and then lights green again after downloading is completed.
CAUTION
Never switch OFF the power while downloading. Switching OFF the power while
the new software is being downloaded will damage the boot files in the controller.
8. After confirming that downloading is completed, turn off the main power and
remove the IC card.
9. The following firmware can be recovered if download fails. Follow the firmware
download recovery procedure 5.2.1.
• Controller
• BICU
• LCDC
10. If more software needs to be downloaded, repeat steps 1 to 7.
11. Turn the main power ON and confirm that the new software loads and that the
machine starts normally.
12. Reconnect any external interfaces removed previous.
SM
SOFTWARE DOWNLOAD
[A]
[B]
5-111
B004I015.WMF
B135/B138