Fusing Idling Temperature - Ricoh Aficio 2035e Service Manual

Fusing Idling Temperature

If copies are not sufficiently fused soon after the main power switch is turned on,
fusing idling should be enabled with SP1103 1.
When fusing idling is enabled, it is done when the temperature reaches the print
ready ("re-load") temperature. The re-load temperature can be adjusted with
SP1105 5,6.
In the opposite case, even if fusing idling is disabled, it is done when the
temperature at power-up ≤ 15 °C
The fusing idling time is as follows.
Temperature at
power-on
15 °C or less
Higher than 15 ° C
SM
Fusing Idling Mode
0: Disabled 1: Enabled
30 s 30 s
Not done 30 s
6-97
IMAGE FUSING AND PAPER EXIT
SP1103 1
SP1103 2
B135/B138