Operational Modes; Automatic Operation; Special Ice Drinks; P.o.s. Signal To Manager's Computer - Cornelius ABS 2.0 Operator's Manual

ABS 2.0 Operator's Manual
The "ABS 2.0" has three modes of operation:
• Automatic (Normal Operation).
• Semi-Automatic (while in Auto).
• Manual.
A O
UTOMATIC PERATION
Operation of the ABS 2.0 is restricted to employees and service personal that have been trained and certified in
the proper operation, service and maintenance of the equipment.
With the unit in automatic mode, the customer places an order at the Drive-Thru.

Special Ice Drinks

Extra and no ice drinks are entered from the P.O.S. as a "TBD" The A.B.S. will automatically produce the drink to
the special order.

P.O.S. Signal To Manager's Computer

The order is transmitted from the P.O.S. to the store computer and from there to the A.B.S. unit.

Cup Turret Rotates

The cup turret rotates to move the proper size to the extract position.
Cup Grabber Rises & Closes
The cup grabber is lifted by a pneumatic cylinder up to the cup. The travel is sensed by three sensors. If full height
is reached, a pneumatic cylinder closes the grabber arms against the cup. A grip sensor detects if cups are
available.
Grabber Lowers & Opens
The cup grabber lowers, pulling the cup from the cup holder and then the arms open dropping the cup into the
cup-holder on the conveyor.
If the grabber should slide of a cup, it would be detected by the grabber sensor.

Conveyor Operates

Sensors check for a cup in position "A." If the sensor is clear, the conveyor rotates clockwise to move the cup to
the ice chute.
This is based on only one drink being ordered. If a second drink had been ordered, the conveyor would have
moved only one position and the second cup would have been extracted and dropped into the conveyor. The two
cups would then be moved clockwise until the first cup reaches the ice fill position.

Ice Portion Is Dispensed

The ice gate is opened by a pneumatic cylinder for the time needed to dispense the selected ice portion.
The agitator continues to operate for the set refill time to refill the ice chute.

Cup To Dispensing Nozzle

Sensors check for a cup in position A. If the sensor is clear, the conveyor moves the cup to the beverage fill point.
The valve opens to dispense the desired syrup and water in the desired portions into the cup.
Publication Number: 621058590OPR

OPERATIONAL MODES

- 10 - © 2019, Cornelius Inc.