Nozzle Cleaning; Dis-Assemble Nozzle - Cornelius ABS 2.0 Operator's Manual

NOZZLE CLEANING

Dis-assemble Nozzle

1. Remove the valve nozzle by rotating clockwise
direction as shown in Figure Figure 23.
2. Remove the diffuser by pulling it vertically down-
ward as shown in Figure Figure 24.
3. Remove diffuser gasket from diffuser as shown
in Figure Figure 25.Clean nozzle, diffuser and
gasket in warm soapy water, then rinse it in clean
water and then allow to air dry. wipe down with
clean cloth.
© 2019, Cornelius Inc.
Figure 23.
Figure 24.
Figure 25.
- 17 -
ABS 2.0 Operator's Manual
Publication Number: 621058590OPR