The "ABS 2.0" has three modes of operation:
•
Manual.
•
Automatic (Normal Operation).
•
Semi-Automatic (while in Auto).
I
S
NITIALIZING AND
Turn ON the ABS 2.0 unit at the ABS 2.0 ON/OFF switch located on the left top corner of the stand. During
the power-up sequence the Self Test and Initializing messages will be displayed as each test is being made.
When the tests are complete the final message will be displayed and will remain for 5 seconds before the unit is
placed in the manual mode.
If the initializing process doesn't detect an Ethernet connection it will generate an error, plug in (POS) cable.
NOTE: Closes by operator or in 30 sec so unit can be ran in semi auto or manual.
NOTE: Once plugged (POS) in the unit/ application has to be restarted.
© 2019, Cornelius Inc.
OPERATIONAL MODES
T
ELF
EST
Figure 9.
- 11 -
ABS 2.0 Operator's Manual
Publication Number: 621058590OPR