Q
C
UARTERLY
LEANING
Tools Required
•
Phillips Head Screw Driver
Condenser Filter Cleaning
1. Remove lower front panel by removing screws and lifting up with the handle.
2. Turn power supply off via the Pre-Chiller power switch.
3. Slide the condenser air filter vertically and remove the unit.
4. Clean the filter using hot water and shake it dry.
5. Reinstall the condenser air filter.
6. Turn power supply "ON".
7. Reinstall the lower front panel.
© 2019, Cornelius Inc.
(O
P
-
NLY FOR
RE
CHILLER
- 33 -
ABS 2.0 Operator's Manual
U
)
NITS
Publication Number: 621058590OPR